12V Loud Single Tone Snail Horn 110dB 30W Red Motorcycle Horn

This 12V single tone snail horn is a compact signalling device listed for motorcycle use. It runs on a 12V supply and draws 2A, with a stated power rating of 30W and a sound level of 110dB. The horn uses a copper voice coil and a plastic diaphragm, and it comes in a red finish. The source data lists an impedance of 20101501Ω and a working temperature of 25°C. It is available as a single red unit or as the Red 2pcs option. If you are looking for a 12V horn with a straightforward single tone and a snail-shaped body, this model provides the core specifications in a simple package.

Features and Construction

The main technical details of this horn are its voltage, current draw, power rating, sound level, and internal materials. These points help you check whether it matches your vehicle's electrical setup and whether the tone and volume suit your needs.

Material and Build

The voice coil is made from copper, which is the conductive winding inside the horn. The diaphragm is made from plastic, and it is the part that moves to create the sound. The horn body has a snail shape and a red finish. No further housing material, seal type, or mounting bracket material is stated in the source data. The listed impedance is 20101501Ω, and the working temperature is 25°C. These figures are provided as given, with no additional performance claims attached.

Size and Practical Fit

No physical dimensions, mounting hole spacing, or weight are provided in the source text. The horn is listed for motorcycle use, and its 12V, 2A requirement means it needs a supply that can deliver the stated current. Because the size is not specified, you should check the space available on your motorcycle or vehicle before ordering. The red colour is the only finish stated, and the Red 2pcs option gives you two red horns if you need a pair. There is no information about whether a relay or additional wiring is required.

Uses and Placement

This horn is intended for 12V applications, with motorcycle use listed in the source data. Its practical placement depends on the space available and the mounting method you choose, since no bracket or hardware details are included.

Event or Professional Use

With a 110dB sound level, this horn is designed to be clearly audible in typical road or traffic conditions. The single tone output is straightforward rather than musical, which suits standard signalling purposes. The 12V supply and 2A current draw are the key electrical requirements. No certifications, weatherproof ratings, or professional installation specifications are stated. If you are fitting it as part of a workshop or fleet setup, you will need to confirm the electrical compatibility with your own equipment.

Everyday Home Use

Although the source lists motorcycle use, the horn can be used in any 12V application where the electrical values match and the physical space allows. The red finish may be visible behind a grille or fairing, which can help with identification. The working temperature is listed as 25°C, so consider the location and typical operating conditions. No home-specific fittings or indoor use claims are made in the source data. As with any electrical component, correct wiring and secure mounting are necessary.

Benefits and Buying Value

The value of this horn comes from its stated output, simple single tone, and the choice between one unit and a two-piece set. The specifications are limited, so the practical benefits are tied directly to the listed voltage, current, power, sound level, and materials.

Reuse and Low Maintenance

No maintenance schedule, lifespan, or serviceable parts are described in the source text. The copper voice coil and plastic diaphragm are the only internal materials named. Because the horn is an electrical component, keeping connections clean and dry is a reasonable general practice, but no specific care instructions are provided. The red finish is the only cosmetic detail given. There are no claims about corrosion resistance, water resistance, or long-term reliability. Any maintenance beyond basic connection checks would need to be based on the vehicle's own requirements.

Why Choose This Product

This horn offers a 12V, 2A, 30W specification with a 110dB single tone output and a snail-shaped body. It is listed for motorcycle use and comes in red, with a Red 2pcs option for those who need two. The copper voice coil and plastic diaphragm are the stated internal materials. The impedance is 20101501Ω and the working temperature is 25°C. If those figures match your needs and you have space for a snail-type horn, this model provides the essential details without extra claims. No dimensions, mounting hardware, or warranty information are included in the source data.